- - 7-Feb-2011 - - PalletPRO (V7.7034.14.08) - kalbavi. - /media/ptlite/ptconv.pc - /media/ptlite/ptprocdt.pc - /media/ptlite/pttlk2pp.pc - /media/ptlite/ptmulti.pc - /media/ptlite/ptupdvrs.pc - /media/ptlite/ptseobdt.pc - /media/ptlite/ptgeobdt.pc - /media/ptlite/ptprof.pc - Fixes: - 1. If you do ML partial pallet startup, and you specify a full layer for the top UL of a ML, - then, the robot will not pick from the proper infeed and place properly on the unitload. - 2. If you had a top slip sheet (or top cap) for a ML, then the slip sheet may not necessarily - be always put on the top layer. Instead, it may put it in the bottom layer of the ML. - 3. If partial pallet index is initiated at the end of a full layer of a ML which would be followed by a slip sheet, that slip sheet may get put on the wrong pallet.(EOB = off). - 4. If you have a 2-pallet cell and you try to capture duty data for only one of the pallets (you are - running 1-inf-1-pal in a multiple pal cell), then the robot would not stop collecting duty data when - it completes that unitload. - Enhancement: - A variable [PMPALT]ul_alt_inf is provided for the PLC to allow providing alternate infeed data for - a standard unitload. Presently, the PLCINDEX.TP program does not seek data from the PLC for alt inf - if the new UL is a standard UL (and not ML). - -
kmex