Changing language on handheld BY-OBD tool (AutoXray EZ-scan4000)
Language can be changed by uploading the different language by PC/laptop into the Ezscan4000 unit. The following languages are available:
- English (“ENG”)
- Spanish (“ESP”)
- French (“FRE”)
- German (“GER”)
- Italian (“ITA”)
- Portuguese (“POR”)
Requirements are that the USB drivers are installed and that connection is verified by EZ-PC tool
Programming the unit:
Determine which COM-port the SDL connection cable has, as follows:
Open Windows “Device Manager “, as follows:
To open Device Manager, click Start, and then click Control Panel. Click Performance and Maintenance, and then click System. On the Hardware tab, click Device Manager.
Click “Ports” and note down the COM port number.
Startup language programming tool “ManufTests.exe”
1: Select desired language
4: fill in Com Port noted earlier
3: check this box to program the language after testsequence
2: fill in 0 (zero) to keep the same serial number
Connect the interface cable to the same USB port as used earlier
Wait if driver installation sequence begins. If yes, choose automatic installation.
Windows might give following warning; Click “CONTINUE ANYWAY”
If driver installation will take place TWICE
Turn on the tool
Press CONFIG
Scroll down to “3-download”
Press Enter
Then testing of settings will begin,
Followed by programming of the tool with the required language.
rudyrpg