Apx. A     

Appendix A              Handling the LCD Module

Precautions for handling the LCD module

The LCD module can be easily damaged during assembly or disassembly. Observe the following precautions when handling the LCD module:

1. When installing the LCD module in the LCD cover, be sure to seat it so that it is properly aligned and maximum visibility of the display is maintained.

2. Be careful to align the holes at the four corners of the LCD module with the corresponding holes in the LCD cover before securing the module with screws.
   Do not force the module into place, because stress can affect its performance.

Also, the panel’s polarized surface is easily scarred, so be careful when handling it.

3. 
   If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again.

If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface. Do not apply cleanser directly to the panel.

4. If water or other liquid is left on the panel’s surface for a long period, it can change the screen’s tint or stain it.  Be sure to quickly wipe off any liquid.

5. 
   Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks.

6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module.

7. 
   Do not expose the module to direct sunlight or strong ultraviolet rays for long periods.

8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.

9. Do not disassemble the LCD module. Disassembly can cause malfunctions.

10. 
    If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These materials can release gas that can damage the panel’s polarization.

Appendix B              Uploading Image Files (OS) for e310

Pocket PC e310 Image File (OS) Uploading Procedures:

There are two files you need to upload into Pocket PC e310, there are:

(a)   BOOT.bin (boot loader), it takes a few second to upload this file, and

(b)   NK.bin (Kernel Program), it takes around 5 minutes to upload this file.

Note:              BOOT.bin is the first file that needs to be uploaded.

                                          NK.bin is the second file that needs to be uploaded.

In order to prevent the shortage power of the Battery, so please connect the AC Adapter to your Pocket PC e310 together with its USB Cable or Cradle. Short of  the Battery power when uploading file shall damaged Your Pocket PC e310.

(1)   If Your Desktop PC or Note Book is still running the Microsoft. Active Sync

Program; please unload it before you are going to run/load the Upload Utility.

(2)   Copy and extract the Upload Utility “DownloadToolsviaUSB.zip“ into your Desktop PC or Note Book. After extracting the file, you may go to Subdirectory

\DownloadToolsviaUSB\USBTools and then run load the “RemoteUpdate.exe”

Load the Upload Utility Program by clicking it with mouse; please don’t connect

the USB Cable to your Pocket PC e310 firstly.

(3) Configure the Com Port setting of the Upload Utility Program to be USB port.

(4)   Type in the File Name that you are going to upgrade to Pocket PC e310. You may

     Click the Browser Button and then choose the File that you want to upload.

     After typing the “ BOOT.bin” file Name in the “Image file name field “, please

     Don’t click the “Start Button” before you have done the bellowing major steps:

Push the Warm reset hole/button that located at the Lower cover, and then immediately press the “Task “ and “ Home” button of your Pocket PC e310 simultaneously, please don’t release your finger until the “ Preparing to download ” message comes out on your Pocket PC Screen, it shall take around 6 second to coming out. After the “Preparing to download” message come out, please connect immediately the USB cable to your Pocket PC e310.

The “Task” and “Home” button are located at the Left side and Right side of the Cursor Button of your Pocket PC e310.

(5) And then click the “Start Download” button on your Desktop PC or Note Book’s

      Screen. And now, the BOOT.bin file is uploaded into Pocket PC e310.

(6) After finishing upload the BOOT.bin file from your Desktop or Note Book PC,

              The Pocket PC e310 will re-boote automatically.

(7) Do the same procedures as the above for uploading the Second file (NK.bin) into

     Pocket PC e310. After finishing upload the file, the Pocket PC e310 also will

     reboot automatically. And now you Pocket PC e310 has been replaced with the

    OS successfully already. You may check it at the Top left Conner on your Pocket

    PC e310 when it is rebooting.

                                                 ____________ End ____________

Pocket PC e310 Maintenance Manual                            A-7