bizhub_c360_c280_c220_im_A0ED-9602-11E.pdf
(
1623 KB
)
Pobierz
II. Installation space (unit: mm (inch))
Color MFP 36/36 ppm (C36-1) + DF-617 + PC-207 +
FS-527 + SD-509 + MK-713
IV. Accessory parts
Color MFP 36/36 ppm (C36-1), 28/28 ppm (C28-1), 22/22 ppm (C22-1)
INSTALLATION MANUAL
No.
Name
Q’ty
1.
User’s guide holder
1
1909
(75-3/16)
2.
Installation manual
1 set
Applied Machines: Color MFP 36/36 ppm (C36-1), 28/28 ppm (C28-1), 22/22 ppm (C22-1)
658
(25-7/8)
991
(39)
260
(10-1/4)
3.
Paper size label
1
4.
Label (Legal restrictions on copying) *
1
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
5.
Label (Super G3 label)
1
6.
Cap A (Black)
2
7.
Cap B (White)
2
8.
Power cord *
1
I. Outline of installation procedures
9.
Power cord instruction *
1
PC-107
PC-207
PC-408
DK-507
*2
10.
Cord clamp
1
✱
Electronic system options
11.
Control panel
1
AU-101
WT-506
12.
Screw (3
×
8 mm)
1
EK-604
*1
EK-605
*1
AU-102
Machine
MK-713
*2
13.
Spacer
1
14.
Panel pen
1
WT-507
*2
1463.2
(57-5/8)
UK-203
*1
AU-201
KH-101
* Varies depending on the applicable marketing
area.
Note:
Keep the label (Super G3 label) at hand. It is nec-
essary for mounting the FAX Kit.
321
(12-5/8)
1092.2
(43)
VI-505
*3
SP-501
DF-617
OC-509
MK-720
FK-502
SC-507
Electronic system options
JS-603
IC-412
*3
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
PK-517
FS-527
FS-529
JS-505
*1
: No particular order in installation procedures.
*2
: Varies depending on the applicable marketing area.
*3
: Unable to be installed in Color MFP 22/22 ppm (C22-1).
SD-509
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
A0EDIXC042DA
When installing the machine and associated options as a system, follow the order shown on the upper.
Note:
• For the detailed installation procedures for each
option, follow the instructions given in the corre-
sponding installation manual and perform the
procedures correctly. (Optional devices must be
installed after completing the main body instal-
lation.)
• When placing the machine on the floor, make
sure to use the paper feed cabinet or the desk
to secure the performance and the quality of
the product.
• To use this machine, install the reverse auto-
matic document feeder or the original cover.
Even if you do not install the original cover, be
sure to install the hinge covers furnished with
the original cover.
• Once the Power Switch is turned ON, do not
turn OFF it until the installation work has been
completed.
• Lifting the machine in an awkward position or
transporting it in a poorly balanced position
III. Pre-installation check items
1. Select a level and stable place for installing the
machine.
2. Be sure to use a power source of the voltage and
frequency indicated in the product specifications.
Ensure that the current carrying capacity of the
power outlet is at least equal to the current listed
in the product specifications.
3. Power the machine directly from a dedicated
power outlet. (Do not use an extension cord.)
4. Do not plug or unplug the power cord with wet or
dirty hands, otherwise you may get an electric
shock.
5. Avoid a hot and humid environment, or a place
exposed to direct sunlight.
6. Avoid a dusty location, or a place near volatile
and flammable substances.
7. Avoid a poorly ventilated place.
could result in personal injury. When transport-
ing the machine, assign an adequate number of
persons to the job and ensure that each person
can take a good position of not being exces-
sively loaded.
(mass: approx. 98 kg (216-1/16 lb))
A0EDIXC041DA
A0ED-9602-11
E-1
V. Removing the machine
1. Unpack and remove the machine package.
2. Remove the machine, holding it by the locations
on the left side and the handles on the right side
as shown in the illustration and keeping it level.
Note:
Machine mass: 98 kg/216-1/16 lb
• Make available collective manpower of an
appropriate size for transporting the machine.
• When attaching the machine, as the reference
fit the machine with the corner A and B of the
paper feed cabinet.
VI. Removing protective tape, packing and
other shipping materials
1. Remove the protective tapes and the protective
materials.
2. Open the right door and remove the protective
sheet and packaging materials.
Note:
After removing the packaging materials, make
sure that the transfer roller assy is secured in
place. In the case of <NG>, press the transfer
roller assy into place so that it is secured as shown
in <OK>.
4. Install the furnished control panel.
Note:
Insert the hook of the control panel into the posi-
tioning hole of the machine.
When holding the transportation handles,
be careful not to catch your fingers in the
machine.
A0EDIXC003DB
< OK >
< NG >
A0EDIXC008DA
5. Secure the control panel with a furnished screw.
A0EDIXC006DB
A0EDIXE037DB
3. Remove the packing bracket.
A0XWMXC102MA
A0EDIXC009DA
6. Connect the machine connector to the control
panel.
A
A0EDIXC007DA
B
A0EDIXC002DA
A0EDIXC010DA
E-2
VII. Installing the toner cartridge
Note:
Since cartridge is not furnished with the machine,
purchase toner cartridge (of different colors) sepa-
rately.
1. Shake the toner cartridge up and down and left to
right 5 to 10 times respectively.
Note:
Shake the cartridge adequately. Otherwise, it may
cause trouble.
7. Remove the protective sheet.
10. Open the front door and remove the waste toner
box.
13. Release the lever of the drum unit (K).
A0EDIXC011DA
A0EDIXC017DA
A0EDIXC047DA
8. Slide out the 1st drawer and remove protective
tape from the inside of the drawer.
14. Slightly slide the drum unit (K) out and remove
the protective tape.
11. Remove the protective tape.
A0EDIXC020DA
2. Insert the toner cartridge into the machine.
Note:
• Make sure that the color is same between
inserting port and the toner cartridge.
• Make sure that the blue label position of the
toner cartridge is matched with the one of the
machine side.
A0EDIXC012DA
9. Slide out the 2nd drawer and remove protective
tape from the inside of the drawer.
A0EDIXC014DB
A0EDIXC019DA
12. Remove the protective materials from the four
places.
Note:
Keep the protective materials. It is necessary for
transporting the machine.
15. Slide the drum unit (K) into the machine.
16. Lock the drum unit (K) with the lever.
17. Install the waste toner box.
A0EDIXC021DA
A0EDIXC013DA
A0EDIXC025DB
A0EDIXC048DA
E-3
VIII. Mounting the accessory parts
1. Attach the cap A and B furnished with the
machine.
X. Installing the set guide for banner paper
1. Affix a furnished label to the set guide for banner
paper as shown in the illustration.
Note:
Select a label that fits onto the machine from the labels
furnished with the
set guide for banner paper
.
3. Push the toner cartridge all the way in and rotate
it clockwise to lock it.
Note:
Make sure that the toner cartridge is pushed all the
way in.
2. Connect the power cord.
A0EDIXE038DA
3. Fit the cord clamp furnished with the machine
over the power cord (one screw).
Note:
Use the screw removed in step 1.
A0EDIXC026DA
A0EDIXC022DA
2. Set the panel pen in the pen holder at the control
panel.
A0EDIXC033DA
4. Using the same procedure, install the toner car-
tridges for other colors of toner.
5. Close the front door.
2. Open the manual bypass tray and set the set
guide for banner paper.
A0EDIXE039DA
A0P0IXC055DA
4. Plug the power cord into the power outlet.
A0EDIXC023DA
IX. Installing the user’s guide holder/
spacer
Install the user’s guide holder and the spacer.
A02EIXC040DB
XI. Connecting the power cord
1. Remove the screw at the rear of the machine.
C4004u139CA
A0EDIXC027DA
A0EDIXE044DA
E-4
XII. Toner supply
1. Turn ON the Main Power Switch and then Sub
Power Switch.
2. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
3. Touch “Imaging Process Adjustment.”
4. Touch “TCR Toner Supply.”
5. Touch “Cyan”, “Magenta”, “Yellow”, and “Black”,
and press the start key.
* When the start key lights up blue, go to step 6.
6. Touch “OK.”
Note:
When you touch “OK”, the control panel returns to
the “Imaging Process Adjustment” screen. Though
the message, “Please press the Start key After all
adjustment ends”, appears on the screen, you do
not have to press the Start key.
4. Touch “OK.”
5. Touch “Exit” on the Service Mode screen.
6. Turn OFF and ON the Main Power Switch.
Note:
When displayed the Service Mode screen, be sure
to turn off the main power after exiting the Service
Mode screen and wait for 10 seconds or more
before turning on.
/11
×
17
<If A3 or Ledger paper is set in step 1>
6. Touch “Print”, select “A3
12. Touch “Copy”, select “A3
”, and
/11
×
17
press the start key.
A test pattern will then be produced on the
A3 or Ledger paper.
13. Place the test pattern face down on the original
glass.
”, and
press the start key.
A test pattern will then be produced on the A3
or Ledger paper.
7. Place the test pattern face down on the original
glass.
XIV. Adjusting touch panel
1. Press the accessibility key.
2. Touch “Touch Panel Adjustment.”
3. Using the panel pen, lightly touch the center of
the + markers at four places on the touch panel.
(Any specific marker can be the first one.)
Note:
Pressing the touch panel hard may cause dam-
age.
* When all the markers at four places have been
touched, the start key turns blue and lights up
steadily blue.
4. Press the start key.
5. Touch “Close.”
Cyan
Magenta
A0P0IXC061DB
A0P0IXC058DB
14. Place about ten sheets of A3
or Ledger
XIII. Non-image area erase check
1. Select the Non-Image Area Erase Check function
as follows:
Machine
8. Place about ten sheets of A3
or Ledger
paper on the test pattern placed on the original
glass.
Lower the cover.
paper on the test pattern placed on the original
glass.
Lower the cover.
→
→
Non-Image Area Erase Check.
Note:
• Open fully the original cover / reverse automatic
document feeder.
(When OC-509/DF-617 are installed previ-
ously.)
• Do NOT place a document on the document
glass.
• Clean the document glass if dirty.
XV. Setting gradation adjust.
Note:
Before starting the gradation adjustment, install
the optional reverse automatic document feeder or
the original cover.
1. Set that A3
or Ledger
paper is loaded in
the tray.
Note:
If the A3 or Ledger paper is not readily
available, use A4 or Letter paper.
2. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
3. Touch “Imaging Process Adjustment.”
4. Touch “Gradation Adjust.”
5. Touch “Stabilizer” and press the start key.
* When the start key lights up blue, go to step 6.
Note:
When a maintenance call occurs, see the service
manual.
A0P0IXC059DA
A0P0IXC059DA
15. Press the start key.
The machine will start reading the test pattern.
16. When the machine completes reading the test
pattern, the “Gradation Adjust” screen will reap-
pear.
17. Repeat steps from 12 through 15 to let the
machine read the test pattern two times (three
times in total).
18. Touch “END.”
9. Press the start key.
The machine will start reading the test pattern.
10. When the machine completes reading the test
pattern, the “Gradation Adjust” screen will reap-
pear.
11. Repeat steps from 6 through 9 to let the
machine read the test pattern two times (three
times in total).
A0P0IXC091DA
2. Press the Start key.
3. Make sure that “Result” is “OK.”
Note:
If “Result” is “NG1” or “NG2”, review the place and
direction of installation, or take measures to block
the light source (by covering it, etc.), then perform
installation checking again.
(If a fluorescent light or other bright light sources
exist right above the machine, the light source can
hinder installation checking and cause operation
errors in the Non-Image Area Erase Check. For
detailed information, see the service manual.)
E-5
Plik z chomika:
ramirez_pl
Inne pliki z tego folderu:
au-101_im_A09M-9557-00E.pdf
(362 KB)
au-102_im_A0X9-9557-00E.pdf
(359 KB)
au-201_im_A09N-9557-00E.pdf
(431 KB)
bizhub_c360_c280_c220_im_A0ED-9602-11E.pdf
(1623 KB)
df-617_im_A0HU-9560-00E.pdf
(581 KB)
Inne foldery tego chomika:
firmware c280
User Guides
Zgłoś jeśli
naruszono regulamin