cyberbajt_BB54G QIG.PDF

(3350 KB) Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
847451936.049.png
BlackBox BB54G Setup Guide
EN
Default configuration
¡ IP Address : 192.168.1.254
¡ IP subnet mask : 255.255.255.0
¡ WEB login User Name : <empty>
¡ WEB login Password : <empty>
¡ Operation mode :
¡
WAN Access Type: DHCP Client
¡
WLAN mode :
AP
¡
WLAN channel :
11
¡
WLAN SSID :
BlackBox
Gateway
¡
WLAN band :
2.4GHz B+G
Operation modes
¡
Gateway – Wireless AP/router for Internet sharing with Firewall/VPN
Sharing of Internet connection provided via ADSL/Cable Modem or Ethernet connected to the
WAN port using NAT. PCs can connect with the BlackBox BB54G using LAN ports or
wirelessly using AP function. On the Ethernet WAN port are supported WAN connection types
PPPOE, DHCP client, PPTP client or static IP.
¡
Bridge – Multimode Wireless Access Point/Client/Bridge with 5 Ethernet ports
All 5 ethernet ports and wireless interface of the BlackBox BB54G are bridged together and
NAT function is disabled. All the WAN related and firewall functions are not supported.
¡
Wireless ISP – CPE router for Wireless Internet connection with Firewall/VPN
WLAN interface acts as WAN port to connect with Access Point of a Wireless Internet Service
Provider. All 5 ethernet ports are bridged together and can be used to connect with user PCs
sharing the wireless Internet connection using NAT. On the WLAN interface are supported WAN
connection types PPPOE, DHCP client, PPTP client or static IP.
Connectors
SMA-RP Antenna
LAN
WAN
Reset
Power
2 of 17
847451936.056.png 847451936.057.png 847451936.058.png 847451936.001.png 847451936.002.png 847451936.003.png 847451936.004.png 847451936.005.png 847451936.006.png 847451936.007.png 847451936.008.png
 
BlackBox BB54G Setup Guide
EN
Connector
Description
SMA-RP
Coaxial connector for Wireless LAN Antenna
Reset (button)
Push continually 5 sec to reset the configuration to factory defaults
WAN
RJ-45 Ethernet port for WAN connection, auto MDI/MDI-X
LAN 1-4
RJ-45 Ethernet ports for LAN connection, auto MDI/MDI-X
Power
Power jack for external DC 7.5V power supply connection
LED Indicators
Power LED
WLAN LED
LAN LEDs
WAN LED
LED Indicator
State
Description
BlackBox BB54G is powered on.
Power LED
On
Off
BlackBox BB54G is powered off.
WLAN LED
Flashing
Data is transmitting or receiving on WLAN interface.
Off
No data is transmitting or receiving on WLAN interface.
WAN LED ACT
Flashing
Data is transmitting or receiving on the WAN interface.
On
Ethernet link is established on WAN interface.
WAN 10/100M
On
Connection speed is 100Mbps on WAN interface.
Off
Connection speed is 10Mbps on WAN interface.
LAN LED ACT
Flashing
Data is transmitting or receiving on the LAN interface.
On
Ethernet link is established on LAN interface.
LAN 10/100M
On
Connection speed is 100Mbps on LAN interface.
Off
Connection speed is 10Mbps on LAN interface.
Note: To avoid connection of non authorized users through your BlackBox BB54G, use wireless
encryption WEP/WPA/WPA2, activate MAC address filter and activate ID/password for web
configuration.
3 of 17
847451936.009.png 847451936.010.png 847451936.011.png 847451936.012.png 847451936.013.png 847451936.014.png 847451936.015.png 847451936.016.png 847451936.017.png 847451936.018.png 847451936.019.png 847451936.020.png 847451936.021.png 847451936.022.png 847451936.023.png 847451936.024.png 847451936.025.png 847451936.026.png 847451936.027.png 847451936.028.png 847451936.029.png 847451936.030.png 847451936.031.png 847451936.032.png 847451936.033.png 847451936.034.png
BlackBox BB54G Setup Guide
EN
Installation instructions
1. Power On the BlackBox BB54G
Connect DC 7.5V Power Adapter to BlackBox BB54G and plug the adapter into a power socket.
Note: It will take about 1 minute to complete the boot up sequence after power on of the BlackBox
BB54G; Power LED will be active and then the WLAN Activity LED start flashing to show the
WLAN interface is enabled and working now.
2. Connect your PC to any LAN port for configuration setting
Configure your PC with IP address between 192.168.1.1 to 192.168.1.253 and subnet mask
255.255.255.0, then open an Internet browser (i.e. Microsoft IE6.1 SP1 or above) and enter
http://192.168.1.254 to URL field. Following screen will appear:
3. Click on Setup Wizard and follow on-screen instructions to setup basic parameters.
Go through the wizard by clicking on Next and changing shown parameters if desired. Finalize
your settings by clicking on Finished button.
4 of 17
847451936.035.png 847451936.036.png 847451936.037.png 847451936.038.png 847451936.039.png
 
BlackBox BB54G Setup Guide
EN
4. Configure advanced settings and special functions
Browse through Setup menu and change advanced parameters and enable special functions on
appropriate page as you require.
Please consult the user’s manual of BlackBox BB54G for more information.
Note: When use other than supplied antenna with BlackBox BB54G, please respect local radio
regulation rules (EIRP limit) by setting appropriate output power level in Wireless > Advanced
Settings page.
Following table shows output power levels of BlackBox BB54G for each power settings among
maximum recommended gain of external antenna in order to meet 100mW EIRP limit. To take into
account additional losses such as loss of coaxial cable, connectors etc., you can add the loss value in
dB to the Gain values.
Setting
High
Medium
Low
Mode
Power
Gain
Power
Gain
Power
Gain
802.11b
17 ±2 dBm
3 ±2 dBi
10 ±2 dBm
10 ±2 dBi
5 ±2 dBm
15 ±2 dBi
802.11g
15 ±2 dBm
5 ±2 dBi
10 ±2 dBm
10 ±2 dBi
5 ±2 dBm
15 ±2 dBi
CE statement : BlackBox BB54G is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
5 of 17
847451936.040.png 847451936.041.png 847451936.042.png 847451936.043.png 847451936.044.png 847451936.045.png 847451936.046.png 847451936.047.png 847451936.048.png 847451936.050.png 847451936.051.png 847451936.052.png 847451936.053.png 847451936.054.png 847451936.055.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin